Send Message
products

Manual Straightening Machine For T45 T50 T70A Cold Drawn Elevator Guide Rail

Basic Information
Place of Origin: China
Brand Name: Yuhua
Certification: CO,CE,FORM A, FORM E
Model Number: JZJ-M
Minimum Order Quantity: 1 set
Price: USD 10000/set
Packaging Details: Plastic Film and Wooden Case
Delivery Time: 30 days
Payment Terms: T/T
Supply Ability: 20 sets/month
Detail Information
Name: Manual Straightening Machine Application: T45 T50 T70A Cold Drawn Elevator Guide Rail
Color: As Your Requirement Motor Power: 5.5KW
Machine Size: 1200mm*1000mm*1000mm (L*W*H) Length Of Guide Rail: 4M,5M,6M Or As Your Requirement
High Light:

sheet metal straightener

,

coil straightening machine


Product Description

Manual Straightening Machine for T45 T50 T70A Cold Drawn Elevator Guide Rail

 

 

Technical Parameters

 

(1) Applicable products range: T45,T50,T70A (cold drawn guide rail), Length: 4m, 5m

 

(2) Cycle time: It depends on the proficiency of the operator.

 

(3) Machine Size: 1200mm*1000mm*1000mm (L*W*H)

 

(4) The equipment consists: machine bed, fixed block, thrust cylinder, hydraulic pump station, etc.

 

(5) The two main cylinders (thrust cylinders) have a bore diameter of 125 mm and a stroke of 160 mm. Working pressure of 16 MPa and a system operating pressure of 10 MPa.

 

(6) The straightening machine body is made of 10# channel steel and 20MM Q235 steel plate. It is rigid and reliable, and has good stability.

 

(7) The tank volume is 280L, the motor is 5.5KW, and the speed is 1450 rpm.

 

(8) All the topping blocks are quenched and quenched by 40Cr steel, and the surface hardness

is HRC50-55.

 

Brief Introducion

 

Manual straightening machine: using manual method, according to the size of the guide rail, the value of the straightness of the blank guide rail is determined, and the guide rail operated by the operator can meet this requirement.

 

Conveyor Line of Manual Straightening Machine

 

1. The manual straightening machine conveyor line is a conveyor line designed with a manual straightening machine. The line consists of a feeding transverse conveyor, a loading lifting traverse conveyor, independent roller set, an unpowered longitudinal conveyor, unloading lifting traverse conveyor and unloading transverse conveyor. (Air source, etc. are provided by the customer)

 

2. Composition and function of conveyor line

2.1 Feeding transverse conveyor

2.1.1 The transverse feeding conveyor is responsible for conveying the guide rails to the besides of the feeding lifting transverse conveyor. It consists of motor reducer, frame, chain, head transmission device, tail tightening device, etc.

2.1.2 Rack Material: 100*200*4 Square Tube

2.1.3 Motor Power: 1.5KW

2.1.4 Speed: 50mm/s

2.1.5 Length: 5M

2.1.6 The height from chains to ground is: 1000mm

2.2 Feeding Lifting Transverse Conveyor

2.2.1 The loading and hoisting traverse machine is responsible for placing the guide rails conveyed by the transverse conveyor through the cylinder top and moving it to the independent roller group. The equipment is mainly composed of a bracket, a cylinder, a sliding track and so on.

 

2.3 Independent roller set

The independent roller set is installed in front of the manual straightening machine for a total of 3 groups, which is responsible for manually pulling the rails forward or backward. The equipment consists of brackets, rollers, bearings, etc., height 1300mm

 

2.4 Unpowered longitudinal conveyor

The unpowered longitudinal conveyor is responsible for manually pushing the straightened guide rails onto the longitudinal conveyor to facilitate the loading of the lifting transverse conveyor. It consists of brackets, rollers, bearings, etc., with a height of 1300mm.

 

2.5 Unloading Lifting Transverse Conveyor

It is responsible for unloading the rails conveyor onto the transverse conveyor. The equipment is mainly composed of a bracket, a cylinder, a sliding track and so on.

 

2.6 Unloading Transverse Conveyor

It is responsible for conveying the rails of the lifting and traversing machine, and has the function of accumulating materials, reducing the number of lifting and driving, and improving production efficiency.

 

2.6.1 Rack Material: 100*200*4 Square Tube

2.6.2 Motor power: 1.5kw

2.6.3 Line speed: 50mm/s

2.6.4 Rack length: 5M

2.6.5 The height from chains to ground is: 1000mm

 

3. Electrical control system

There are two modes of operation: manual/automatic. It has manual and automatic switching function: under manual state, it can be operated on a single machine for easy maintenance; under automatic state, it can be operated on the whole line and started sequentially; with emergency stop button, it is easy to deal with emergencies and ensure the safety of equipment and operators.

 

4. Weight: 2T

5. Power: 3KW

6. Voltage: 3Phase, 380V, 50HZ

 

Contact Details
Yvonne Ding