|Name:||Manual Straightening Machine||Application:||T70B T90B T140B Hot-rolled Elevator Guide Rail|
|Color:||As Your Requirement||Motor Power:||7.5KW|
|Machine Size:||2200*1500*2100mm (L*W*H)||Length Of Guide Rail:||4M,5M,6M Or As Your Requirement|
sheet metal straightener,
roller straightening machine
Manual Straightening Machine for T70B T90B T140B Elevator Guide Rail
1. Applicable range: T70B---T114/B, guide rail length is 4m, 5m.
2. Model: JZJ-M
3. Manual straightening is a set of equipment for straightness correction of elevator guide rails, which is independently developed by our company, including racks, cylinders, press blocks, automatic flips, hydraulic stations and so on. This equipment is a combination of mechanical and manual operation equipment, with the advantages of improving straightness quality, reducing labor force and increasing output. (Air source, hydraulic oil, etc. provided by customers)
4. Technical Parameters:
4.1 Dimension: 2200*1500*2100mm (L*W*H)
4.2 Processing height: 1300mm
4.3 The equipment consists of a lathe bed, fixing block, main cylinder, hydraulic pump station, etc.
4.4 One main cylinder (thrust cylinder): diameter 200 mm and stroke 200 mm. The allowable working pressure is 30 MPa, and the actual working pressure of the system is 21 MPa.
4.5 The straightening machine body is mainly welded with 14mm and 30mm Q235 steel plates, which is reliable in rigidity and stable in use.
4.6 Fuel tank volume 300L, motor 7.5KW, speed 1450 rev / min.
4.7 All the topping blocks are quenched and quenched for 45# steel forgings, surface hardness HRC50-55.
4.8 Speed: based on manual operation proficiency (normal 700pcs/10h)
4.9 Weight: 3T
4.10 Power: 7.5KW
4.11 Voltage: 3Phase, 380V, 50HZ
Manual straightening machine: using manual method, according to the size of the guide rail, the value of the straightness of the blank guide rail is determined, and the guide rail operated by the operator can meet this requirement.
Conveyor Line of Manual Straightening Machine
1. The manual straightening machine conveyor line is a conveyor line designed with a manual straightening machine. The line consists of a feeding transverse conveyor, a loading lifting traverse conveyor, independent roller set, an unpowered longitudinal conveyor, unloading lifting traverse conveyor and unloading transverse conveyor. (Air source, etc. are provided by the customer)
2. Composition and function of conveyor line
2.1 Feeding transverse conveyor
2.1.1 The transverse feeding conveyor is responsible for conveying the guide rails to the besides of the feeding lifting transverse conveyor. It consists of motor reducer, frame, chain, head transmission device, tail tightening device, etc.
2.1.2 Rack Material: 100*200*4 Square Tube
2.1.3 Motor Power: 1.5KW
2.1.4 Speed: 50mm/s
2.1.5 Length: 5M
2.1.6 The height from chains to ground is: 1000mm
2.2 Feeding Lifting Transverse Conveyor
2.2.1 The loading and hoisting traverse machine is responsible for placing the guide rails conveyed by the transverse conveyor through the cylinder top and moving it to the independent roller group. The equipment is mainly composed of a bracket, a cylinder, a sliding track and so on.
2.3 Independent roller set
The independent roller set is installed in front of the manual straightening machine for a total of 3 groups, which is responsible for manually pulling the rails forward or backward. The equipment consists of brackets, rollers, bearings, etc., height 1300mm
2.4 Unpowered longitudinal conveyor
The unpowered longitudinal conveyor is responsible for manually pushing the straightened guide rails onto the longitudinal conveyor to facilitate the loading of the lifting transverse conveyor. It consists of brackets, rollers, bearings, etc., with a height of 1300mm.
2.5 Unloading Lifting Transverse Conveyor
It is responsible for unloading the rails conveyor onto the transverse conveyor. The equipment is mainly composed of a bracket, a cylinder, a sliding track and so on.
2.6 Unloading Transverse Conveyor
It is responsible for conveying the rails of the lifting and traversing machine, and has the function of accumulating materials, reducing the number of lifting and driving, and improving production efficiency.
2.6.1 Rack Material: 100*200*4 Square Tube
2.6.2 Motor power: 1.5kw
2.6.3 Line speed: 50mm/s
2.6.4 Rack length: 5M
2.6.5 The height from chains to ground is: 1000mm
3. Electrical control system
There are two modes of operation: manual/automatic. It has manual and automatic switching function: under manual state, it can be operated on a single machine for easy maintenance; under automatic state, it can be operated on the whole line and started sequentially; with emergency stop button, it is easy to deal with emergencies and ensure the safety of equipment and operators.
4. Weight: 2T
5. Power: 3KW
6. Voltage: 3Phase, 380V, 50HZ