|Name:||Sheet Metal Decoiler||Width Of Strip:||30-100mm|
|Thickness Of Strip:||≤2mm||Inner Diameter Of Coil:||ф480-520 Mm(according To Customer’s Requirements)|
|Outer Diameter Of Coil:||φ1300mm||Loading Weight:||≤1T|
|Color:||As Your Requirements||Expand Way:||Manual|
Automatic Control Feeding Sheet Metal Decoiler Uncoiling for Steel Thick
Decoiler is a special equipment for metal plate feeding and discharging. The uneven metal plate can be made up of uncoiling, leveling and shearing production lines according to the relevant configuration. It is applicable to mechanical equipment, vehicles, metal products, household appliances, steel structure, decoration and other industries.
Technical Parameter of Metal Sheet Material Decoiler
|1||Width of Strip||30-100mm；|
|2||Thickness of Strip||≤2mm；|
|3||Inner Diameter of Coil||ф480-520 mm(according to customer’s requirements)；|
|4||Outer Diameter of Coil||φ1300mm；Loading Weight:≤1T|
Other Material Rack Decoiler Uncoiler Technical Parameters
|Material inside diameter||Material outside diameter||Material Weight||Speed of levling||Motor||Decoil expansion||G.W.||size of machine (m)|
(1) Automatic operation
The rotation of decoiler uncoiler is controlled by automatic loop arm. The loop arm controls variable speed operation, providing smooth stop and start. Variable speed reduced uncoiler.
Decoiler uncoiler rotation drive system and mandrel expansion power are fully protected. The pendant control allows automatic rotation to be disabled during coil loading.
(3) Electrical requirements
According to customer country requirements
The structure consists of steel plates and heavy structural sections. The seam is sealed and welded. Include structural supports as necessary. The expansion and contraction of the mandrel are realized by a connecting rod system including bronze bearings.
(5) Decoiler finish
After manufacturing, uncoiler frame shall be machine cleaned and powder coated before mechanical and electrical assembly.
(6) Coil car options
Can include reels with weights matching the specified uncoiler. The coil car consists of a "V" shaped surface with a central coil in motion. The coiler car includes sufficient vertical travel to contact the lower surface of the mandrel when fully extended. The power take-up car moves along the rail installed in the base of the uncoiler. The hydraulic check valve prevents the coil from falling vertically in case of hydraulic loss.
Uncoilers and reels can be installed by drilling holes in typical industrial concrete foundations and concrete expansion bolts.