|Name:||Sheet Metal Decoiler||Type:||Decoiler And Leveling Combined|
|Condition:||New Machine||Coil Thickness:||0.5≤4.5mm|
|Leveling Speed:||16m/min||O.D. Of Coil:||1200mm|
|Coil Weight:||2000~8000KGS||Width Of Coil:||400~800mm|
Servo Motor Automatic Material Rack Sheet Metal 2in1 Decoiler and Leveling Machine
Combination features of Uncoiler leveler
1. Adopt four point handwheel precision fine adjustment device, suitable for precision processing products
2. This machine adopts Japanese electromagnetic contact cymbals and electronic parts, with long service life and few faults.
3. The material rack is integrated with the straightener, which does not occupy space and is small in size. It will simplify the loading operation and reduce the production cost of necessary machinery.
4. It is suitable for feeding and straightening machine of various metal plates with good effect and many advantages.
5. It is suitable for continuous stamping and processing of all kinds of hardware, electronics, electrical appliances, toys and auto parts, feeding and correcting, accurate and durable.
6. Roller chrome plating, high precision, very durable.
Feeding and straightening rolls with a hard chrome-faced
Feeding and discharging device
Material rack with air pressure disc brake device
Roll head flattening device
Technical Parameter of All Kinds of Metal Sheet Material Decoiler
1. 2in1 Decoiler and Leveling Machine
|Thickness of material||(0.3~3.2/0.5~4.5)|
|Max Coil Weight(KG)||2000||3000(5000)||5000(8000)|
|Speed of (Feed) Straightening(m/min)||16|
|Work Roll||Upper 5/down 4|
|Uncoil Expansion Method||Manual/Hydraulic|
2. NC Servo Motor Heavy Material Decoiler
|Width of Material (mm)||150||200||300||400||500||600|
|Thickness of Material (mm)||0.35-2.2|
|Material Weight (Kg)||500||1000||2000||3000|
|Max. Speed (m/min)||15|
(1) Automatic operation
The rotation of decoiler uncoiler is controlled by automatic loop arm. The loop arm controls variable speed operation, providing smooth stop and start. Variable speed reduced uncoiler.
Decoiler uncoiler rotation drive system and mandrel expansion power are fully protected. The pendant control allows automatic rotation to be disabled during coil loading.
(3) Electrical requirements
According to customer country requirements
The structure consists of steel plates and heavy structural sections. The seam is sealed and welded. Include structural supports as necessary. The expansion and contraction of the mandrel are realized by a connecting rod system including bronze bearings.
(5) Decoiler finish
After manufacturing, uncoiler frame shall be machine cleaned and powder coated before mechanical and electrical assembly.
(6) Coil car options
Can include reels with weights matching the specified uncoiler. The coil car consists of a "V" shaped surface with a central coil in motion. The coiler car includes sufficient vertical travel to contact the lower surface of the mandrel when fully extended. The power take-up car moves along the rail installed in the base of the uncoiler. The hydraulic check valve prevents the coil from falling vertically in case of hydraulic loss.
Uncoilers and reels can be installed by drilling holes in typical industrial concrete foundations and concrete expansion bolts.