Aluminum Round Square Rectangle Tube Pipe Making Machine

Basic Information
Place of Origin: China
Brand Name: Co-effort
Certification: CO,CE,FORM A, FORM E
Model Number: HF-63
Minimum Order Quantity: 1 set
Price: USD 200000/SET
Packaging Details: Plastic Film and Wooden Case
Delivery Time: 90 days
Payment Terms: T/T
Supply Ability: 10 sets/month
Detail Information
Machine Name: Pipe Making Machine Thickness Of Pipes: δ1.0~3.0mm
Pipe Dia. Range: Φ12.7~Φ63.5mm Cut-to-length: 4~12M
Length Tolerance: 2mm Machine Condition: New
Shaft Diameter: 60mm Driven Way: Gearbox
High Light:

steel tube making machine


tube mill production line

Product Description

Automatic High Precision Aluminum Round Square Rectangle Tube Pipe Making Machine



Introduction of Pipe Making Machine


HF63AL high frequency straight seam welded pipe set is a special equipment for producing high frequency straight seam welded aluminum or aluminum alloy pipes for automobile condenser pipes or structural pipes or industrial pipes. Its diameter is 12.7-Φ 63.5mm, and its wall thickness is δ 1.0-3.0mm. High precision and high speed production line can be achieved by optimizing design, material selection, precision machining and rolling. The production speed of the pipeline can be adjusted within the range of appropriate pipe diameter and wall thickness.

The strip with precise size, which is pre cut by high quality aluminum or aluminum alloy coils on the slitter, is fed into the pipe rolling mill, and gradually forms a circular section with an opening joint along its length in the pipe rolling mill.

The high frequency induction welding technology is used to heat the weld edge and weld the longitudinal seam to form a continuous weld.

The steel belt is a circle formed by continuous seam welding. The welded pipe is further calibrated to the specified tolerance in the sizing machine by grinding and cooling the external weld bead.

After that, the endless welded pipe will be cut in the flow to the required and measured length.The finished pipe can be round, square or rectangular.


Summary of Pipe Making Machine


1. Pipe making machine has three types: Stainless Steel Pipe Making Machine, High Frequency Pipe Welding Machine and ERW Pipe Welding Machine.


2. One machine can produce round, square and rectangle pipes.


3. Our pipe making machine material use very thick steel, rollers are all use Cr12, shafts use 40CrMov. All material adopts heat treatment.


4. All electrical accessories are international brands we use.




{Aluminum strips}Double-head un-coiler →→Strip-head Shearer & Butt welder station →→Horizontal spiral accumulate group→→Forming M/C (Main driving unit +Flattening Entry unit + Breakdown zone + Fin pass zone + Seam guide unit + High frequency induction welding system + Squeeze welding roller unit + Outside scarfing unit + Horizontal ironing stand) →→Emulsion water Cooling section →→ Sizing M/C (Main driving unit +Sizing zone + Speed testing unit + Straightener + Vertical pull-out stand) →→ NC cold flying saw under computer control →→ Run out table 


Pipe Making Machine Technical Parameters


Double-heads Un-coiler

Type: Double-heads & Auto rotary type, mandrel expansion by pneumatic

With pneumatic brake


- Coil ID: Φ400mm or Φ508mm (As customer’s decision later)

- Coil OD: Max. Ø1600mm As customer’s decision later

- Coil width: Max. 200mm

- Coil weight: Max. 2.0tone/coil

by pneumaticl:

- Main rotation mandrels Dia.: Φ120mm

- Expansion stroke: Φ320 – Φ420mm or Φ420 - Φ520mm (?Chosen by customer later)

- Compressed Air Pressure: 5Bar ~ 8 Bar

- Pneumatic supply system: Customer Ready

Double mandrel’s position auto rotation by 0.55Kw AC inverter motor

Pneumatic shear:

- Type: Crocodile shear by air cylinder

- Compressed Air Pressure: 5Bar ~ 8 Bar

- Pneumatic supply system: Customer Ready

- No. of Blade: 1 couples

- Blade material: Cr12 (surface quench HRC58~62)

- Strip Width: Max.260mm

- Strip Thickness: 0.6 ~ 3.0mm

Auto TIG AL Butt welder by PLC control

- Type: AL welding,TIG welding gun auto-running by PLC-control

& inverter speed adjuster

- Welder: WSE-315 AC pluse AL welder

- Welding current: 10~315A

- Inlet protection gas: Argon gas more than 99.99%

- Welding torch: 1set

- Strip clamp: By air cylinder

- Welding speed: 75~350mm/min

- Welding time: 3~5min per cycle

Overall: 1100 x 750 x 1580 mm


Shearer & Auto AL Butt welding station(DJJ-260B)

Low bracket : 1 set

Revolver : 1 set

Flattening unit: 1 set

- No. of flatten rolls: 7pcs

- Flatten roll diameter: Ø 100mm

- Width of leveler rolls : 260mm

- Material of pinch rolls: 45#(Surface quench HRC45~48,chrome-faced)

Entry unit : 1 set

- Drive method: Motor → Triangular belt pulley → Angle gearbox → universal joints → Pinch rolls

- Pinch roll motor : AC 11Kw,By AC inverter speed regulating system

- Strip feeding speed: Max.280m/min

- Pneumatic brake: 1set

- Push & Release for the Pinch roll: By air cylinder

- No. of Pinch roll: 1 Couples 2Pcs 

- Pinch roll diameter: Ø 200mm

- Material of rolls: 45#(Surface quench HRC45~48,chrome-faced)


Accumulator : 1 set

 - Drive method: Motor → Universal joints → Carbide-faced cylindrical gear decelerator,With lubricant oil pump→ Open gear → basket

- Driver motor: AC 15Kw, By AC inverter speed regulating system

- Basket OD.: Ø4000mm

- Basket ID.: Ø1220mm

- Spiral drum OD.: Ø400mm

- Devices for prevent the narrow strip turn-over: 3sets,120º equispaced

- Material of rolls: 45#(Surface quench HRC45~48,chrome-faced)

- Run out speed: Max.220 m/min

- Storing capacity: Appr.350~800m

3.6 High bracket: 1 set


Forming section

Main Driver unit ① for forming mill

- Main AC motor①: 1set,“SIEMENS”AC 75Kw /1500rpm

- Main gear decelerators①: 1set,ZLY type-Carbide-faced cylindrical gear decelerator

- With 1set AC driver control box①

Forming section consists of :

- Forming section base: 1set

- Secondary gear box : 7sets,2pcs output axis type,

With spiral bevel gear & Helical-spur gear

- Material of spiral bevel gear: 20CrMnTi

- Material of helical-spur gear: 45#

- Material of gear box: 35#,welded Plate

- Universal joint for heavy load truck: 7sets (14pcs) 

- Washing and cleaning unit: 1set

- New type feeding entry & Flattening unit: 1set (with 2H+2V+7R+2H+2V =15pcs rollers)

- Stand Arrangement: BD1+BDS1 / BD2+BDS2 / BD3+BDS3 / BD4 / +SC1+SC2 / FP1+FPS1 / FP2+FPS2 / FP3+FPS3



Aluminum Round Square Rectangle Tube Pipe Making Machine 0Aluminum Round Square Rectangle Tube Pipe Making Machine 1

Contact Details

Phone Number : +8613584478980

WhatsApp : +8613584478980