27mm Wide Ball Bearing Drawer Slide Rail Roll Forming Machine

Basic Information
Place of Origin: China
Brand Name: Co-effort
Certification: CO,CE,FORM A, FORM E
Model Number: GD160
Minimum Order Quantity: 1 set
Price: USD 30000/set
Packaging Details: Plastic Film and Wooden Case
Delivery Time: 75 working days
Payment Terms: T/T
Supply Ability: 10 sets/month
Detail Information
Machine Name: Roll Forming Machine Usage: Ball Bearing Drawer Slide Rail
Forming Speed: 12~15m/min Roller Material: Cr12
Shaft Material: 40Cr Product Material: Stainless Steel
Roller Station: 12~16 Stations Tolerance: + - 1.5mm
Hardness: HRC58-62 Driven Way: Gearbox Or Chain Driven
Model: 35mm, 30mm, 27mm, 45mm Type: 3 Fold
High Light:

light gauge steel framing machines


stud and track roll forming machine

Product Description

27mm Wide Ball Bearing Drawer Slide Rail Roll Forming Machine



Characteristics of Drawer Slide Rail Roll Forming Machine


1. Frame: the main beam is made of national standard section steel, reinforced in the middle, welded as a whole, and the installation surface is processed by stress relief and gantry milling; the welding material is high-grade flux cored gas shielded welding wire (only one in the same industry at present), and the structural strength and other mechanical properties of the frame meet the standards of marine components.


2. Archway: the archway is made of ball milled cast iron by integral casting and finish machining, instead of gray cast iron casting.


3. Number of archways: about 16 groups (including modeling and renovation).


4. Forming roll: GCr15 bearing steel forging, salt bath furnace quenching, hardness up to HRC58-62 °.


5. Shaft: material 40Cr, diameter £ 95mm, tempered hb250-280, fine turning.


6. Main motor and reducer: main motor 55.0kw, AC motor; reducer k157 (or similar)


7. Transmission mode: motor + reducer + gear distribution box.


8. Gearbox model: gy200 (according to national standard)


9. Rolling speed: 0-12m / min (adjustable)


10. Structural parts and standard parts shall conform to national standards. Harbin brand is selected for bearing, and famous brands at home and abroad are used for other standard parts.


11. Appearance treatment: the welding parts shall be polished, degreased and puttied before spraying the primer, and the top coat shall be sprayed with two times of high-grade polyurethane paint, with fine appearance treatment and beautiful atmosphere.


Main Components of Roll Forming Machine


3 tons passive de-coiler 1 set
roll forming machine 1 set
Feeding and leveling device 1 set
Hydraulic cutting device 1 unit
Hydraulic station 1 unit
PLC control box 1 unit
Safety cover 1 unit
Out table 2 units



Production Process of Roll Forming Machine


Material Coil – De-coiling – Feeding – Roll Forming – Straightening – Hydraulic Punching & Cutting-Off – Finished Slide


Technical Parameters of Drawer Slide Rail Roll Forming Machine






Type 380v/3ph/50hz  
    Main Motor power 5.5kw  
    Cutter power 4kw+1.5kw  
2. Forming speed(m/min) 40-45m/min max Not include the time of cutting
3. Forming stations 12stations  
5. Material of rollers CR12  
6. Thickness of structure 30mm  
7 Forming shaft diameter(mm) 50  
8 Drive Gear box  
9 Type of cutting Hydraulic cutting  
10. Control system PLC xinjie  
11. Install dimension(depend on the final design) 4.8m×0.6m×1.2m Without panel length
12. Total weight (Approx) 2.3T Depend on final design
13. Screen Text screen /touch screen  
NO Name Unit Qty  
1 Man-made decoiler set 2
  • Max width 300mm
  • Inner diameter -460-510mm
  • Max loading capacity 1000kg
  • Manual operating type manual expansion to tighten the coil
  • Break down drive whole line stop while decoiler idle
2 Feeding Table set 1  
3. Forming Rollers set 1
  • Forming Station 16 nos
  • Forming Rollers material Cr12
  • Forming Rollers hard treatment HRC 58-60
  • Shaft of roller Diameter 40mm
  • Shaft material 40Cr,heat treatment, refine grinded
  • Machine frame: steel welding
  • Main sidewall thickness 25mm
  • Machine driven by universal joints via gearbox
  • Roll forming motor 5.5kw with frequency inverter controller
  • Gearbox RV worm gearbox
4. Hydraulic cutting with hole punching set 1
  • Hydraulic pump stand 1 set
  • Hydraulic Components taiwanese
  • Hydraulic System discharging protection with wind cooler
  • Edge cutting 2 sets both ends
  • Middle joint hole punching 23sets/152.4mm
  • Fire testing hole 2 sets both ends
  • Mould standard SKD-11 Steel Japanese
  • Mould frame&plate S45C
  • Mould pin SKH-9 steel Japanese
  • All mould treatment By slow-feeding Nc wire cutting
5. Profile Discharger set 1
  • Driven machinical Auto Head
  • Operation Full automatic along with forming machine
6. Electric Control system set 1
  • Frequency converter Silin ,Taiwanese
  • PLC Fatek ,Taiwanese
  • Touch screen weinview Taiwanese
  • Profile length cutting forming machine stops then cut
  • Operational controller: touch screen knob switch emg

Brake down and so on

     Power supplier 380V 50Hz 3phase

ITEM Description Quantity Function Capacity Working flow Weight(KG) Diamension(MM)
1 Roll forming Machine(12 steps) 2 sets One set if for inner rail, Another set is for outer rail. 6m/min Decoiler-forming-hole punching&cutting-run out table 4000 5400*820*950mm
2 Roll forming Machine(16 steps) 1 set For making middle rail. 6m/min Decoiler-forming-hole punching&cutting-run out table 4000 6200*820*950mm
  Punching & Cutting Moulds 3 sets Installed on those three roll forming machines   For punching hole and cutting rail of roll forming machine    
3 Automatic Assembly Machine 1 set For assembling the beads on the slot, then install the slot on the middle rail 20pcs/min   600 2100*1100*1500
4 40T Power Press machine for making Bead slot(including the Mould) 1 To make the bead slot, which will punch the bead slot with mould   Material feeder- punching(mould)-control box    

Ball Bearing Drawer Slide Rail Roll Forming Machine Photos

27mm Wide Ball Bearing Drawer Slide Rail Roll Forming Machine 0


Contact Details

Phone Number : +8613584478980

WhatsApp : +8613584478980