Send Message
products

Hydraulic Automatic Single Head Heavy Material Rack Sheet Metal Decoiler Uncoiler

Basic Information
Place of Origin: China
Brand Name: Yuhua
Certification: CO,CE,FORM A, FORM E
Model Number: NC300
Minimum Order Quantity: 1 set
Price: USD 4000/set
Packaging Details: Plastic Film and Wooden Case
Delivery Time: 15 days
Payment Terms: T/T
Supply Ability: 50 sets/month
Detail Information
Name: Sheet Metal Decoiler Type: Heavy Material
Condition: New Machine Coil Thickness: ≤4.5mm
Speed: 20m/min Motor: Servo Motor
High Light:

uncoiling machine

,

uncoiler machine


Product Description

 

Hydraulic Automatic Single Head Heavy Material Rack Sheet Metal Decoiler Uncoiler

 

 

CNC Servo Feeder Structure


1). High quality, no electricity: Brush servo motor, effectively adjust the pitch, shorten the test time.


2). With high sensitivity decoder, the feedback is accurate, and then the feeding accuracy is within + 0.02mm.


3). Equipped with timing belt drive, it can eliminate backlash, wear very little, no noise, even no lubrication, safety and environmental protection.


4). The use of built-in motor units can be avoided when transporting and handling damage.


5). Available types: Hydraulic uncoiler, mandrel uncoiler


6). Hydraulic expansion and hydraulic drive system


7). Simple operation


8). Applicable to precoated steel coil, cold rolled steel coil and galvanized steel coil

 

Optional Device


1. Adjustable leveling/straightener speed


2. Adjustable machine according customer''s material requirement


3. Installation a press arm for heavy-thick material


4. Optional oil expansion or pneumatic expansion


5. Motor can be controlled by variable speed or frequency converter

 

Technical Parameter of Metal Sheet Material Heavy Decoiler

 

Model

Material Width

(max/mm)

Thickness Standard

type

Height of

mould line

Feed Speed

(m/mm)

Servo Moter

(kw)

NC-200 200mm 0.3-4.5mm 70-150mm 20m/min AC1.8KW
NC-300 300mm 0.3-4.5mm 70-150mm 20m/min AC1.8KW
NC-400 400mm 0.3-4.5mm 70-170mm 20m/min AC2.9KW
NC-500 500mm 0.3-4.5mm 70-170mm 20m/min AC4.4KW
NC-600 600mm 0.3-4.5mm 70-170mm 20m/min AC4.4KW
NC-700 700mm 0.3-4.5mm 90-190mm 20m/min AC5.5KW
NC-800 800mm 0.3-4.5mm 90-190mm 20m/min AC5.5KW
 

Remark: We als can according to customers requirements design non-standard material rack

 

Other Material Rack Single-head Light Decoiler Uncoiler Technical Parameters

 

Model LF-150 LF-200 LF-300 LF-400 LF-500 LF-600
LF-150A LF-200A LF-300A LF-400A LF-500A LF-600A
Width of Material (mm) 150 200 300 400 500 600
Thickness of Material (mm) 0.35-2.2
0.35-3.2
Coil I.D.(mm) 450-530
Coil O.D.(mm) 1200
Material Weight (Kg) 500 1000 2000 3000
500 1000 2000 3000
Max. Speed (m/min) 15
Motor (HP) 1 2 3
1 2 3 5
Coil Expansion Manual
 
 

Product Application

 

(1) Automatic operation
The rotation of decoiler uncoiler is controlled by automatic loop arm. The loop arm controls variable speed operation, providing smooth stop and start. Variable speed reduced uncoiler.
(2) Safety
Decoiler uncoiler rotation drive system and mandrel expansion power are fully protected. The pendant control allows automatic rotation to be disabled during coil loading.
(3) Electrical requirements
According to customer country requirements
(4) Architecture
The structure consists of steel plates and heavy structural sections. The seam is sealed and welded. Include structural supports as necessary. The expansion and contraction of the mandrel are realized by a connecting rod system including bronze bearings.
(5) Decoiler finish
After manufacturing, uncoiler frame shall be machine cleaned and powder coated before mechanical and electrical assembly.
(6) Coil car options
Can include reels with weights matching the specified uncoiler. The coil car consists of a "V" shaped surface with a central coil in motion. The coiler car includes sufficient vertical travel to contact the lower surface of the mandrel when fully extended. The power take-up car moves along the rail installed in the base of the uncoiler. The hydraulic check valve prevents the coil from falling vertically in case of hydraulic loss.
(7) Installation
Uncoilers and reels can be installed by drilling holes in typical industrial concrete foundations and concrete expansion bolts.

 

 

Contact Details
Yvonne Ding