|Place of Origin:||China|
|Certification:||CO,CE,FORM A, FORM E|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Plastic Film and Wooden Case|
|Delivery Time:||75 working days|
|Supply Ability:||10 sets for 75 working days, usually have stock|
|Thickness Of Coil:||1mm To 2mm||Material Of Rollers:||Cr12|
|Material Of Shafts:||42CrMo||Name:||Cold Roll Forming Machine|
|Diameter Of Shafts:||45mm||Control Syemst:||PLC Control|
|Speed:||Max. 30 Components For One Minute|
45mm Roll Forming Machine,
PLC Control Roll Forming Machine,
Locking Clamp Ring Roll Former
1mm Thickness Flange Inner Ring Cold Roll Forming Machine
Introduction of Locking Clamp Ring Roll Forming Machines
1. Introduction of the ring clamp: It consists of a shallow integral v-flange retainer and two bands for positioning and securing the selected closure type. The ring clamp is light in weight and compact in structure, which is widely used in various industrial sectors to pull and fix two circular flanges. Compared with the v-clamp, the ring clamp is a low-cost clamping solution.
2. Introduction of our machines: Two V-shaped flanges are produced by one-step roll forming and cut to at the end of the machine. We adopt frequency converter motor or servo motor to control speed, PLC and HMI to control flanges length and quantity.
Main Configurations of Flange Ring Clamps Cold Roll Forming Machines
|2||Straightening Machine||1 set|
|3||Roll Forming and Cutting Device||1 set|
|4||Guarding Cover||1 set||Optional|
|5||Control System||1 set|
|1||Equipment Floor Area||12×2.5×2(L×W×H)M|
|2||Feeding Direction||From Right to Left|
|3||Voltage||380V,50Hz,3 Phase (according to countries)|
|4||Air Supply||Flow Rate:0.5m³/min; Pressure: 0-0.7MPa|
|7||Material of Strip||Stainless Steel|
|8||Width of Strip||≤80mm|
|9||Thickness of Strip||≤2mm|
|10||Rolling Speed||15 components/minute|
|11||Total Power||Around 25KW|
|Width of Strip||30-100mm；|
|Thickness of Strip||≤2mm；|
|Inner Diameter of Coil||ф480-520 mm(according to customer’s requirements)；|
|Outer Diameter of Coil||φ1300mm；Loading Weight:≤1T|
|2||Straightening Device||Width of Strip||30-100mm；|
|Thickness of Strip||≤2mm；|
|Motor Power||1.5 KW|
|Roller Arrangement||7 rollers|
|Arrange mode||4-Point Independent|
|3||Roll Forming||Forming Stations||8 Stations|
|Type of Driven||Gear|
|Forming Rack:||The roller is adjusted by digital display.|
|Max. Feeding Width of Coil||100mm|
|Max. Thickness of Material||2mm|
|Diameter of Shafts||Φ50mm ,42CrMo (quenching and tempering)|
|Material of Roller||Cr12,Hardness: HRC58-60°|
|Main Driven Motor||15KW|
|Bending and Cutting Devices||1 set|
|Turkey Head Device||1set|
|4||Guarding||Usage and characteristics||Safety protection device mainly aims at two parts of the protection, one part of the main forming machine protection, the use of aluminum profiles and transparent plexiglass, electrical control, etc. for the main forming machine safety protection; the other part of the automatic material rack and leveling position protection, the use of aluminum profiles and wire mesh for the overall protection of the equipment with only one outlet.|
Q: What's your payment terms?
A: 30% as the deposit by T/T in advance, 70% as the balance payment by T/T after you inspect the machine and before shipping.
Q: What is your delivery?
A: After we received your 30% payment, we will arrange the production. About 60 to 75 working days for delivery.
Q: Do you supply the coils?
A: No. We only provide roll forming machines.
But we will give you the contact information of our long-cooperate coil factory. You contact them directly. In this way, you can get the right coil and get the best price.